Mixing Instructions

How to mix melanotan 2 for injection

  • Remove yellow cap from the vial of melanotan 2 and clean the top surface with alcohol wipe provided. (Picture 1)
  • Remove cap from sterile water. (Picture 2)
  • Remove the syringe from its packaging and pierce the side of the sterile water and withdraw 1ml (1 full syringe) of sterile water. (Picture 3)
  • Insert syringe to the vial of Melanotan and slowly depress the full amount of water. (Picture 4)
  • Gentle rotation of bottle in your hand will be enough to mix the solution correctly. Do not shake.
  • Store your mixed solution between 2 and 8 degrees. Preferably in the fridge. This will insure longevity off the peptide.

*Side note; 
*Some prefer to mix the powder with 2ml (2 full syringes in total) so that the dosage can be reduced or so they can spread the vial out over a longer period of time.

Mixing instructions for nasal spray kits

  • Remove yellow cap from the vial of melanotan 2 and clean the top surface with alcohol wipe provided. (Picture 1)
  • Remove cap from sterile water. (Picture 2)
  • Remove the syringe from its packaging and pierce the side of the sterile water and withdraw 1ml (1 full syringe) of sterile water. (Picture 3)
  • Insert syringe to the vial of Melanotan and slowly depress the full amount of water. (Picture 4)
  • Gentle rotation of bottle in your hand will be enough to mix the solution correctly. Do not shake.
  • Remove all of the mixed solution from the glass vial and place into your nasal bottle that was provided.
  • The remaining sterile water that is left you can now pour this directly into the nasal bottle. Gentle rotation again will ensure everything to be mixed. (Picture 5)
  • You now have 5ml of mixed melanotan 2 ready to be used.
  • Store your mixed solution between 2 and 8 degrees. Preferably in the fridge. This will insure longevity off the peptide.

The correct dosage

Pull back on the plunger and remove 0.1ml (0.1 on the side of the syringe) (Picture 6) **If you mixed the solution with 2ml (2 full syringes) the dosage would be 0.2ml everyday.
This dosage is used every day for 10 days.
To prevent side affects it is usually advised to take before bed. An antihistamine can be used to further prevent any if taking before bed is not an option.
Around day 4/5 and after experiencing some sun exposure you should start to see some results. 
Continuing the full 10 days you can then decide whether your desired tan has been achieved or not.
Depending on your natural skin tone according to the fitzpatrick scale will dictate whether you need to continue with another bottle or not.
A maintenance dose can be started at 0.2ml per week split up in 0.1ml on Monday and 0.1ml on thursday etc, this will allow you to maintain the tan and melanin levels you have for as long as you would like.


Nasal Spray dosage is 1 spray in each nostril every day until desired tan has been reached.

Melanotan 2 with lid removed
sterile water with lid removed
Nasal Spray Melanotan 2 & Tanning Injections UK
depressing water into vial
water beside nasal bottle
0.1ml dosage
Shopping Basket